Saab Key Replacement
The loss of your car keys or misplacing them can be extremely annoying. It's simple and affordable to replace a car key in the event that you have an additional key.
You'll have to take off the old electronic key fob and then program it into your car using a Saab Tech 2 device. You'll be charged in the event that you delay this procedure.
Keys lost or stolen
The car keys are equally easy to duplicate like it was a decade ago. Modern keys come with an electronic chip. These chips provide a good amount of protection from theft and key copying. This does not mean you will never misplace your key.
If you do lose your keys, don't panic! The first thing you must do is check the places where you normally put your keys. You may find them in your pockets for your jacket, pants or even lying on the ground next to your front entrance. If you're not able to find your keys, contact a locksmith who will come to your vehicle to help you locate them.
A dealer can create the new car key in case all your keys are missing. This can be costly and may take several days to complete. Instead we can reprogram the current computer's EEPROM, and save you money.
The ignition key on the 03-11 SAAB isn't very durable. The buttons are susceptible to falling out and they can get stuck. If you're stuck with one working ignition key you must make an additional one as soon as possible to avoid any inconveniences.
Lockouts
Saab owners are advised to carry a spare key, because it is simpler to replace a lost or stolen one. If you lose only one key, it's an entirely different story. It's costly to purchase an additional key, and it requires the dealer to install and program the new TWICE Module (Column Integration Module on older cars) and an OEM key that is brand new (not from Amazon or eBay).
If remote control keys are not locking or unlocking the car, there are several possibilities for the cause. Most likely is the battery of the coin that is dead in the key fob. However, it could also be caused by worn buttons, water damage, signal interference, and receiver module issues.
If your issue continues to persist even after having tried all of these, try reprogramming the ignition key. This is done by changing the count (in inverse Hex) to zero in the ECU. You'll need to remove the case of your key fob in order to do this. The most efficient method to accomplish this is to remove the emergency key from the fob. Then, you can use a flathead to remove the fob's case and expose the battery. Be careful when opening the case and make sure you don't pour any liquids into the fob as they can damage the electronic components within.
Broken Keys
Car keys being stolen or lost can be a frustrating experience especially if you don't have spare keys. It is possible to minimize the hassle by having replacement keys made in Bishopthorpe by an experienced locksmith. If you're in the middle of nowhere or just a few blocks away We can provide you with a brand new set of electronic chip keys in a short time.
Every Saab since 1995 has been required to have an immobilizer system within the vehicle. This makes it virtually impossible to steal your car without a special key. The key requires a specific transponder that is embedded in it to turn on the engine and unlock your doors. The key also needs a transmitter/transponder chip that needs to be matched with the car's computer module in order to work. This can only be accomplished by a dealer using a special tool known as Tech-2 or other similar software.
It is crucial not to remove the broken key from your ignition or lock. This could cause damage to the lock and create other issues. When you try to force a key or lock that is broken out, it typically breaks the steel blade of the key or the mechanism of the lock. This can be much more expensive than hiring a locksmith replace the key.
Replacement
Owners of Saab automobiles manufactured between 1994 and up are advised to have at minimum two keys that work for their vehicle. Replacing just saab key code can be expensive and difficult. The dealer must replace both the CIM (Column Integration module) or TWICE, depending on the model. They will also have to program the key to work with the new module. Claimed-new keys from aftermarket sellers are often not properly initialized and could not program correctly when you require them.
It is not uncommon for the battery in a key fob to degrade after a couple of years of use, particularly when it is used frequently for locking and unlocking the car. Fortunately that replacing the battery in most SAAB 9-3 key fob models is simple and does not require any special tools.
A mobile SAAB locksmith can typically do this at a cost that is 75% less than what a dealer would charge for the same service. Locksmiths don't need to replace the car's computer, and can re-program the existing EEPROM to accept the new keys. This could save you lots of money as a brand new computer for your car is costly. It's logical to contact a mobile SAAB Locksmith whenever you need to replace the key fob on your car.